DR3 two channel MPEG2/4 DVR with built-in monitor

Specifications

Power	AC Adapter	12VDC 1A, 110-240VAC Adapter
	Battery	1x3.7V Li-polymer rechargeable battery, 3500mAH
	Camera	2 x 12V 120mA output, 5-12V adjustable
Video	Video Stream	MPEG-4/2 (MPEG2 requires conversion using supplied PC software utility)
	Resolution	PAL: 720x576-D1, 352x288-CIF(Optional)
		NTSC: 720x480-D1, 352x240-SIF(Optional)
	Bit Rate	1M-8Mbits/s, configurable
	Frame Rate	PAL: 25fps, NTSC:30fps
	Record Mode	LQ/EP/LP/SP/HQ + video only UQ mode
	Standard	PAL/NTSC/SECAM
	Picture	Brightness, Contrast, Saturation adjustable
Audio	Sampling	8, 16, 32, 48KHz
	Format	PCM/ADPCM
Interfaces	Remote Control	IR, LANC and LAN/Internet
	Controls	Record, Stop and directional push buttons
	Video In	2 x RCA, 1Vpp, 75ohm,
	Video Out	n/a
	Audio In	2 Channel, Mono or Stereo
	Camera Power	2.1mm power jack
	DC Power	4.2mm O.D. x 1.3mm I.D., DC Power Jack
	Battery	2MM Header
	Indicator(s)	Multi-color LED
	LANC	2.5mm LANC Jack
	Alert	Buzzer, Motor Vibration optional
	LCD	2.5" Colour LCD Screen
	Ethernet	10/100 Base-T
	Serial	1 RS232 Optional
	DIO	2 digital I/O Optional
	GPS	MMCX Female
Storage	CF Card	512MB-32GB
	Format	FAT32
Physical	Dimension	120x70x23.5mm
	Weight	260g (with battery and CF)

FAQ

Does the CAM EYE SPORT V1.4 or v1.6 LANC remote work with the DR3?

Yes, both versions work OK. If you don't have a remote control, consider our CES2 LANC remote, which is fully compatible with the Cam Eye Sport/DR3 and is also waterproof.

How long does the internal battery last?

If fully charged, the internal battery will power the recorder and two bullet cameras for approx. 2 hours of recording. The battery will take approx. 6.5 hours to charge fully after being run down completely.

I accidentally turned off the DR3 while it was recording and now I can't open the video file on the card. Can I recover the file?

We have tested several software utilities capable of opening and re-saving corrupt AVI and MPG files. We recommend you try these for yourself. Most have a trial version you can download to try before committing to buy. We cannot guarantee you will be able to recover a corrupt file if caused by powering off or removing the CF card during recording.

AVI file utilities:
ASF-AVI-RM-WMV Repair - www.repairvideo.com
VirtualDub - www.virtualdub.org

MPG file utilities:
VideoReDo Plus - www.videoredo.com
MPEG-VCR/Womble MPEG Editor - www.womble.com

I have set recording quality to 'UQ' but don't get any sound.

'UQ' quality mode uses the full processing power of the DR3 to record in native MPEG2 video at the highest quality possible, but no audio is recorded in this mode.

I want to import video from the DR3 into Final Cut Pro or AVID for editing, but the DR3 file type is not supported.

Apple's Final Cut Pro and AVID are non-linear editing systems which don't support generic video file types such as .AVI or MPEG2. It will be necessary to convert the DR3 files to .MOV (Quicktime) format using third party software first. We recommend the use of MPEG Streamclip (http://www.squared5.com) for MAC-based editors and River Past Video Cleaner (http://www.riverpast.com/en/prod/videocleaner/pro/) for PC-based editors.

Why do I get "Error - No Card!" when I try to record on a new Flashcard?

You must turn the DR3 off BEFORE inserting a compact flashcard or you will see this error when you try to record. This error may also occur with an incorrectly formatted card or one that's incompatible.

Videos

• No Videos for this Product.